Industry Solutions
Two-Way Radio & Communications for Construction & Contracting
General contractors, subcontractors, and project managers across the Mid-South trust Comserv Services for rugged, professional-grade radios that keep crews coordinated across job sites, equipment yards, and multi-site operations.
Job Sites Are Tough. Your Radios Should Be Too.
A construction site is one of the most demanding radio environments there is — open sky one minute, steel-framed structure the next, with heavy equipment noise, multiple subcontractor crews, and a job site that changes shape every week. Consumer walkie-talkies from a hardware store aren’t built for this. They fail inside buildings, they can’t reach across a large site, and they don’t hold up to the daily abuse of a working job site.
Comserv Services has supplied construction firms, general contractors, and specialty trades across Tennessee, Mississippi, and Arkansas with professional two-way radio systems designed for the job site. We sell, program, service, and rent rugged commercial-grade radios — and we can add GPS fleet tracking for equipment and vehicles when you need it.
Whether you’re running a single job site with a crew of ten or managing multiple projects across the region with rotating subcontractors, we’ll build a communications solution that scales with your work.
Who Uses Radios on Your Site
Common Problems We Solve
Construction Site Communications Challenges
Steel & Concrete Kill Signals
Once framing goes up, radio performance drops — fast. Steel studs, concrete decks, and metal roofing all attenuate signals. Professional radios with better receiver sensitivity and repeater support maintain coverage as the building takes shape.
Large & Changing Site Footprints
A job site that starts as a cleared lot becomes a multi-story structure over months. Coverage needs change constantly. We design systems that work at ground break and stay reliable through topping out.
Multiple Crews, Multiple Channels
General contractors, electricians, plumbers, HVAC crews, and site security all need to communicate — but not always on the same channel. Talkgroup programming keeps crews organized without stepping on each other.
Equipment & Vehicle Accountability
Knowing where your trucks, trailers, and heavy equipment are — across multiple job sites — reduces theft risk, improves dispatch, and supports accurate billing. GPS fleet tracking integrates with your radio system.
Equipment & Services
What We Provide
Rugged Portable Radios
Kenwood and Motorola commercial portables rated to MIL-STD-810 for shock, vibration, dust, and water. Built for the daily abuse of a working job site — not a camping trip.
- MIL-STD-810 rated for job site conditions
- Kenwood NX-series digital portables
- Noise-cancellation for heavy equipment areas
- Long battery life for full-shift operation
Site Coverage & Repeaters
Portable and fixed repeaters extend coverage across large sites, into steel-framed structures, and between buildings. We size the system for your site footprint and adjust as the project grows.
- Portable repeaters for temporary sites
- Fixed repeaters for long-term projects
- In-building coverage as framing goes up
- Multi-site linking for regional contractors
Project Radio Rental
Short-term and long-term rental for project-based crews, subcontractors, and seasonal work. Professional Kenwood radios, pre-programmed for your channels, with no long-term commitment.
- Daily, weekly, and monthly rates
- Pre-programmed for your talkgroups
- Scale up or down as the project evolves
- Repeater rental available for large sites
GPS Fleet & Equipment Tracking
Real-time GPS tracking for trucks, trailers, and heavy equipment across all your job sites. Reduce theft risk, improve dispatch, and know exactly where every asset is at all times.
- Real-time vehicle and equipment location
- Theft deterrence and recovery support
- Multi-site visibility from one dashboard
- Professional installation by our technicians
Programming & Service
Every radio we sell is programmed for your specific channels and talkgroups. Ongoing service, battery replacement, and repair keep your fleet ready for the next project.
- Custom channel & talkgroup programming
- FCC licensing assistance
- Battery replacement programs
- Factory-trained technicians
From the Blog
Professional vs. Consumer Radios: What’s the Difference?
That hardware-store walkie-talkie might seem like a bargain — until it fails inside a framed building, dies halfway through a shift, or can’t reach across a large site. Our guide breaks down exactly what separates a professional two-way radio from a consumer model, and why it matters on a job site.
Radios We Often Recommend
NX-3200 / NX-3300 portables (14-pin rugged accessories) · NX-1200 / NX-1300 portables · NX-1700 / NX-1800 mobiles
Why Contractors Choose Comserv Services
- Experience equipping construction firms from small specialty trades to large general contractors
- Site coverage assessments — we evaluate your footprint before recommending equipment
- Rental options for project-based crews and subcontractors who don’t need permanent equipment
- Authorized Kenwood dealer and Motorola Value Added Reseller
- Factory-trained technicians install and service every system we sell
- FCC licensing assistance included with every new system
- GPS fleet tracking for trucks, trailers, and heavy equipment
- Local Mid-South service team — rapid support when a project can’t wait
From the Blog
Resources for Construction Teams
Let’s Talk About Your Job Site
Call us for a free communications assessment. We’ll evaluate your site footprint, your crew structure, and your coverage needs — then recommend a system that works from ground break through project closeout.
Related Products & Services